It’s really odd how much espresso accessories often cost, making you wonder what’s going on with the prices. You could grab a plain, unbranded puck screen from places like Amazon or AliExpress for around five bucks. Then, check out the Normcore puck screen; it costs four times as much.
They look the same. They are both made from a stainless steel mesh. They’re both served on top of coffee.
So, are you paying a “brand tax” for the Normcore logo, or is there a real engineering difference to back it up? As an analyst, I really don’t care about how it’s packaged. What truly matters to me is the metallurgy and those tight manufacturing tolerances.
Here’s how it all shakes out.
The Construction: 316 vs. 304 Steel
You know, 304 steel is pretty much everywhere. It’s that go-to, all-purpose stainless steel, super popular for all sorts of things because it’s strong and doesn’t rust easily.
You can’t really see the first difference, but it’s super important for how long something lasts.
- Generic Screens: Most of the screens out there that don’t cost an arm and a leg are made from 304 Grade Stainless Steel. It’s safe for food, sure, but it just isn’t as tough. Over time, with all that acidic coffee and high heat, it won’t hold up as well.
- Normcore Puck Screen: Is made from 316 Grade Stainless Steel (often with a titanium coating option). This stuff is marine-grade steel. It resists pitting and corrosion better.
Does it matter for taste? No. Does it matter for durability? Yes. If you’re going to hang onto this screen for five years, that 316 steel is going to serve you better. It’ll just hold up to the harsh cleaning stuff you need, like Cafiza, to truly clear out any clogs.
The “Finger Prick” Test: Edge Finish
Honestly, this is the main reason you’d want to go with a good, reputable brand like Normcore. Lots of cheap screens are just punched right out of a big sheet of mesh and then sold without any more finishing.
- The Danger: This leaves “burrs,” which are just tiny, super sharp jagged wires on the outside edge. I actually poked my finger on a cheap screen not just any screen, but a six-dollar one. And what’s even worse, those little loose bits of metal can snap off and get right into your coffee grinds.
- The Normcore Difference: Normcore finishes their screens by either laser-welding or bonding the edges. That rim feels really smooth. You can run your finger around the edge without finding a snag. It doesn’t feel like some rough industrial part; it feels like a proper finished tool.
Performance: Is the Extraction Better?
Honestly, when you just look at how things are flowing, there’s not really any difference to speak of. Both screens (assuming they are both roughly 1.7mm thick and 150 microns) spread water out in a similar way.
Where Normcore really shines, though, is how consistent their sizing is.
If you order a 53.3mm screen from Normcore, it arrives exactly at 53.3mm, fitting a VST or IMS precision basket just right, hitting wall-to-wall. Sometimes, generic screens just aren’t made very well. You might buy one that’s supposed to be “53mm,” but it turns out to be 57mm instead. That small difference can create a gap, letting water sneak down the sides (side-channeling), which totally defeats the purpose of having the screen there in the first place.
The Cleaning Reality
I’ll be straight with you: both screens really do clog up the same.
Just so you know, the Normcore name doesn’t actually stop coffee oils from turning sticky inside the mesh. No matter if you spend five bucks or twenty-five bucks, you’ll still have to soak that screen in hot detergent (like Cafiza) once a week. Just because it costs more doesn’t mean it cleans itself.
The $20 Question: Buy or Skip?
Get the Normcore Puck Screen If:
- You use Precision Baskets: You need the exact 53.3mm sizing to prevent side-channeling in those IMS or VST baskets.
- You hate metal splinters: Nobody likes getting poked by metal splinters. That’s why you want a screen with smooth, welded edges.
- You want it to last: The 316 steel will handle years of soaking in chemicals a lot better than those cheaper types.
Stick to Generic If:
- You are experimenting: If you are just messing around and aren’t sure about using a puck screen, get a cheap one to try it out first.
- You don’t mind sanding: If sanding isn’t a problem, grab an inexpensive screen and some sandpaper; you can smooth out those sharp edges yourself.
Our Honest Opinion For something that touches your food every single day, spending an extra $15 on the Normcore finish is definitely worth it just for the peace of mind. If a cheap wire filament ends up in my espresso or worse, my finger it’s just not worth the risk to go with the generic stuff.
